My Previous Install
TOYOTA FJ CRUISER 2007 - FRONT BRAKE UPGRADE - FJ CRuiseR ’07 - ’10 pTr09-35070
Info - /10-11_TRD_Catalog.pdf
Install - /PTR09-35070inst.pdf
--------------------
30mm limit on the rotors
TRD Big Brake Kit - Stoptech replacement pads - Used with the TRD BBK caliper - Brake Pad D609
TRD PERFORMANCE BRAKE FRONT RIGHT ROTOR 07-13 FJ CRUISER - PTR0935082
TRD Performance Brake Front Left Rotor 07-13 FJ Cruiser - PTR0935083
--------------------
Caliper - ST-40 - Pad Options - Stoptech, EBC, Hawk
/brake-pads/brake-pad-d609
/big-brake-kits/replacement-parts/bbk-pads-and-components/st40-components
--------------------
User - BCFDT-10
/maintenance-tech/157835-trd-big-brake-kit-question-2.html
"Installed the Stoptech street performance pads. The Axxis ones are no longer available. I paid close attention to the cleaning of the caliper and slides. I had the rotors machined as little as possible. The manufacturers recommended bed-in proceedure consists of 10 "stops" from 60 mph-5 mph with increasing brake pressure to almost lock-up, without stopping completely. Took 3 cycles of this for proper material transfer and to blue the rotors. The cold bite is about the same as the Axxis pads...strong, maybe even a little better. Modulation is great. There was no fade whatsoever during the 3 bed-ins. The Axxis pads would show some minor fade after a bed-in cycle. There is no noise or squealing, and they are supposed to be considerably less dusty than the Axxis pads, those were very dusty. I will update in a few weeks on that. Overall very pleased, and I feel they are the same or better in every aspect so far."
--------------------
TRD FJ BIG BRAKE KIT
Part NO.: PTR09-35070
Replaced By: PTR09-35100
--------------------
Part No.: HB141-Compound-Thickness
Hawk Brake Pad, Porsche 928 (D609)
FMSI D372, D447, D609.
Fits:
1994-98 Audi RS2
1994-96 Ferrari 456 GT Coupe Rear
and many Porsche models, including:
1996-98 911 Carrera 4 rear
1991 911 Turbo
1986 928 S
1987-91 928 S4
1990-91 928 GT
1989-91 944 Turbo
1992-95 968 Sport
Also fits the Stoptech ST40 caliper.
--------------------
Bendix Website - DB439
Aftermarket Upgrade Kit / Caliper Stoptech ST-40 1999 - NOW
Set Consists of - 4 Pads 132 x 70 x 18 mm
I have Purchased DB439HPX - QFM HPX
-------------------- Extract From Install PDF --------------------
Kit Contents
Item # Quantity Reqd. Description
1 1 Brake Rotor, LH Front
2 1 Brake Rotor, RH Front
3 1 Brake Caliper Assembly, LH
Front with 2 M12X30mm Allen
Head Socket Bolts
4 1 Brake Caliper Assembly, RH
Front with 2 M12X30mm Allen
Head Socket Bolts
Hardware Bag Contents
Item # Quantity Reqd. Description
1 2 Stainless Steel Brake Hose
2 2 Banjo Bolt
3 2 Rubber End Cap
4 4 Copper Washer
5 1 Dust Shield Template
6 1 Installation Instructions
7 1 Mirror Hanging Tag
8 1 Owner’s Document
Recommended Tools
--- Personal & Vehicle
Safety Glasses Safety Glasses /face shield
Vehicle Protection Seat & Floor Covers
Fender Covers
Work Gloves
Special Tools Notes
Chassis Lift or (Hydraulic Jack & Jack
Stands)
Fluid Drip Trays One per side
Air Powered Vacuum With chip collection bag
--- Installation Tools Notes
21mm Deep Socket ½” Drive
Air Impact Gun ½” Drive
10mm Flare Nut Wrench
Needle Nose Pliers
17mm Deep Socket ½” Drive
Air Powered Nibbler
Torque Wrenches 3/8” & ½” Drive
9/16” Socket 3/8” Drive
Soft Mallet
11mm Combination Wrench
10mm Allen Socket 3/8” Drive
Breaker Bar ½” Drive
--- Special Chemicals Notes
Toyota Brake Fluid #00475-1BF03 or Fluid:
SAE J1703 or FMVSS No.
116 DOT3
Toyota Brake Cleaner #00289-2BC00-CA
No comments:
Post a Comment