Energy Suspension Prothane Engine Mount Insert Kit - Eclipse to EC5W Legnum

I haven't posted in ages!

Not to worry, I have still been busy.

So I currently am doing small things to the Legnum.

I have a bunch of mounts to stick in.

Energy Suspension Prothane Engine Mount Insert Kit

Contains the 4 parts to replace damaged or sagged engine mounts.

You need to remove each mount, cut out the rubber from the metal frame and insert the prothane mounts.

The front roll mount rubber will sit a little proud on each side, as this kit is made for the Eclipse. 

The best install procedure is to get an Eclipse front roll mount, which are stronger than the Legnum ones.

Mitsubishi Eclipse:

13-503BL = ENGINE MOUNT INSERTS - RIGHT UPPER

13-507BL = MOTOR MOUNT INSERTS - FRONT

13-508BL = MOTOR MOUNT INSERTS - 6 CYL - REAR

13-509BL = MOTOR MOUNT INSERTS - LEFT UPPER

I used the Eclipse front roll stopper mount, you need to elongate the mounting hole to make it fit. about 5mm

ALTERNATE PART NUMBERS FOR 13509

13-509-BL

13-509

13-509BL

13-509

13509BL

13509