ADM chassis to light wiring harness [above]
[above] ADM wiring harness i will cut off
Soldering in the ADM wiring harness, spliced into the JDM
Red = 12V low beam
Black = ground
Blue = high beam
Green = driving light
Brown = indicator
There was another black cable in the JDM harness. That is not being used.
Cleaning up the wiring. I left the JDM wiring harness in tact
My HID came with low profile ballast. They don't align with the original mount holes. Hence the over use of zip ties :)
I also used some hot glue to reduce stress on the ballast connector
Hi mate, is it essential to leave the JDM harness intact?
ReplyDelete