JDM HID Z27AG Conversion - Part I

OEM ADM lights for the Colt
Low Beam: H7
High Beam: H1
Fog: H11

The factory HID bulbs are D2S more here >>>
Mitsubishi Xenon HID Headlight Ballast Control Unit ECU = w3t16271

Factory HID should all be: MU820005 4300K

---JDM HID Headlights---

2 harnesses

broken ballast harness ->

#harness 1

6 pin harness

- pin out:

o o o

o o o

- colours from left to right, top to bottom

black, blue, brown

red , gree, brown/black

- brown = indicator

- green = driver low beam

- blue = high beam

- black = cut off

- red = HID Ballast

- brown/black = ? = common earth/gnd for indicator, high beam, driver low beam and part of the 3 pin second harness

<- projectors






#harness 2

3 pin harness

- pin out:

o = #1 yellow

o|o = #2 black | #3 red

- it looks like it runs into the main HID projector - i believe its the auto balancer, the picture (right) is the override module that allows manual control, it goes inline into the auto controller.
Controller can be bought from RSRS (~$200AUD)

---ADM Headlights---

1 harness

#1 harness

5 pin harness

- pin out:

o o o

o o

- blue, black, red, green, brown (haven't checked the order yet)

- assuming they all match up to the JDM colors

- that just leaves the second harness to figure out?

---Stock Lights---

low beam are H7

high beam are H1

fogs are H11

<- Stock lights




Other parts to the JDM HID Install:
http://ayu452.blogspot.com/2011/10/jdm-hid-z27ag-conversion.html
http://ayu452.blogspot.com/2011/10/jdm-hid-z27ag-conversion-part-ii.html
http://ayu452.blogspot.com/2011/10/jdm-hid-z27ag-conversion-part-iii.html

Other parts that maybe needed is the autoleveler:
8634A002 CONTROL UNIT, HEADLAMP AUTO LEVELING. Period: 2006.05.1-2006.09.3;
8634A006 CONTROL UNIT, HEADLAMP AUTO LEVELING. Period: 2006.10.1-2006.09.3;