The INBLAN Manual Churro Maker - New bearings and a full strip and clean

Not only will I fix your cars, I can help fix your restaurant equipment.

They are very similar to cars :) You just need a little know how.  But they are often dirtier than cars though :(

My latest investment, now I can do more types of bushes and bearings.

Haha quality @_@ look at how chewed the shaft is

It took about 6hrs for the machine.  The grease was very hard to break.

Ralliart Colt Clutch - This is what you call a metal clutch

Not my first clutch, you may recall all the other blog posts on clutches and gearboxes.
/removing-gearbox-installation-tips-for.html

Pictures: /lsd-install-z27ag-part-1-getting-box.html
Basic Video: /2012/04/z27ag-ralliart-colt-clutch-install.html
Inside the gearbox Part I: /disassemble-fitment-of-z27ag-gearbox.html
Inside the gearbox Part II: /disassemble-z27ag-gearbox-4g15-getrag.html
Inside the gearbox Part III: /gearbox-parts-lists-rebuilding-my.html
James Clutch Pics I: /z27ag-clutch-and-rear-main-pi.html
James Clutch Pics II/z27ag-clutch-and-rear-main-pii.html






Before & After a Clean










































Grease pivots










Always torque your bolts.









This car is parked outdoors and the bolts are all siezed and tight.  The stud on the alternator stripped @_@



















Ahh the good ol crappy gearbox linkage mounts.  Time to upgrade with some custom units.













More Information on clutches:
- /lsd-install-z27ag-part-1-getting-box.html
- /gearbox-drop-part-1-intake-removal.html
- /gearbox-drop-part-2-tools.html
- /gearbox-drop-part-3-demolished-brakes.html
- /gearbox-drop-part-4-axles.html
- /gearbox-drop-part-5-clutch-out.html
- /gearbox-drop-part-6-clutch-fork-install.html
- /gearbox-drop-part-7-broken-gear-linkage.html
- /gearbox-drop-part-8-morning-shopping.html
- /gearbox-drop-part-9-in-you-go.html
- /clutch-bed-in-procedure.html





































Oh yeh check out that custom metal clutch :D

Energy Suspension Prothane Engine Mount Insert Kit - Eclipse to EC5W Legnum

I haven't posted in ages!

Not to worry, I have still been busy.

So I currently am doing small things to the Legnum.

I have a bunch of mounts to stick in.

Energy Suspension Prothane Engine Mount Insert Kit

Contains the 4 parts to replace damaged or sagged engine mounts.

You need to remove each mount, cut out the rubber from the metal frame and insert the prothane mounts.

The front roll mount rubber will sit a little proud on each side, as this kit is made for the Eclipse. 

The best install procedure is to get an Eclipse front roll mount, which are stronger than the Legnum ones.

Mitsubishi Eclipse:

13-503BL = ENGINE MOUNT INSERTS - RIGHT UPPER

13-507BL = MOTOR MOUNT INSERTS - FRONT

13-508BL = MOTOR MOUNT INSERTS - 6 CYL - REAR

13-509BL = MOTOR MOUNT INSERTS - LEFT UPPER

I used the Eclipse front roll stopper mount, you need to elongate the mounting hole to make it fit. about 5mm

ALTERNATE PART NUMBERS FOR 13509

13-509-BL

13-509

13-509BL

13-509

13509BL

13509