Quick Tips- Ultra Grey® Gasket Maker, a formula for more rigid flanges (120% elongation), is designed for closely spaced bolt patterns and higher load conditions.
- Ultra Black® Gasket Maker is a formula that is eight times more flexible than cut gaskets when cured (360% elongation)
- Ultra Blue® RTV Silicone Gasket Maker, formulated for bonding oil-contaminated metals, is three times more oil-resistant than conventional silicones and eight times more flexible (360% elongation) than cork/composite gaskets.
- Permatex anaerobic Gasket Makers are designed to prevent movement in rigid assemblies. These gels cure between close-fitting machined metal surfaces in the absence of air
- Muffler tail pipe cement - good if you are not welding your exhaust pipe. Use this to connect/seal your exhaust together then you should really tack it with an arc or I have seen some use U bolt/clamps.
What I have Used
- I have used the grey on oil pans, gearbox machined surfaces, head cover and rear main seal without issue. I heard it can be used pretty much anywhere. Some people say black and grey are the same, if you have grey go grey.
- High temp red i have used on exhaust gaskets. Coat the gaskets on exhaust manifolds/dump pipe
- I have a copper spray that people recommend spraying to the back and front of head gaskets and anything else high temp
- Liquid thread sealant - good for and temp sensors whether it be oil or coolant related. Teflon tape might break off and contaminate the oil or coolant. Hence the liquid stuff. Or some fittings use tapered threads, thread tape may get in the way.
- Cooper anti sieze is good for bolts you don't want to fuse/seize. I also use it on brake clips or back of brake pads if you have noise issues.
Background Info
http://www.hylomar.com - another manufacturer of gasket goops
http://news.thomasnet.com/companystory/Tough-Flexible-Gasket-Makers-for-Many-Uses-479723
DANVERS, MA - Tough yet flexible, Permatex® brand Gasket Makers from Devcon are available in a variety of formulations to replace conventional gaskets in even the most demanding industrial applications. These reliable, noncorrosive, form-in-place compounds require no mixing and cure at room temperature. More versatile than conventional gaskets, they not only form to any size and shape, but also offer better performance. They are available in three technologies - elastomeric rubber, silicone rubber, and anaerobic - that resist weathering and thermal cycling, and will not shrink or crack.
The Right Stuff® Gasket Maker is a low-odor thixotropic paste that resists oil and withstands continuous service temperatures from -75° to 450° F. Ideal for OEM assembly lines, this elastomeric rubber fills gaps to 0.25" and offers superior adhesion and flexibility to accommodate joint movement. Typical applications include gearboxes, stamped sheet-metal covers, compressors, pumps, valve covers, and oil pans. It is available in tubes, cartridges, and PowerBead(TM) applicator cans.
Permatex silicone-rubber Gasket Makers seal rigid or flexible flanges. Nonflammable, they withstand continuous service temperatures as low as -65° F and as high as 600° F. Formulated for outstanding oil resistance, these low-odor, nonsagging pastes fill gaps to 0.25". Ultra Black® Gasket Maker is a formula that is eight times more flexible than cut gaskets when cured (360% elongation). Ultra Copper® RTV Silicone Gasket Maker offers 350% elongation and is three times more oil-resistant than conventional (acetoxy) silicones. Ultra Grey® Gasket Maker, a formula for more rigid flanges (120% elongation), is designed for closely spaced bolt patterns and higher load conditions. Ultra Blue® RTV Silicone Gasket Maker, formulated for bonding oil-contaminated metals, is three times more oil-resistant than conventional silicones and eight times more flexible (360% elongation) than cork/composite gaskets. Typical applications for Permatex silicone Gasket Makers include pump housings, machine tools, compressors, gearboxes, valve covers, etc. These products are available in a variety of containers, including tubes, cartridges, and PowerBead(TM) applicator cans.
Available in three formulations, Permatex anaerobic Gasket Makers are designed to prevent movement in rigid assemblies. These gels cure between close-fitting machined metal surfaces in the absence of air and withstand continuous service temperatures as low as -65° F and as high as 400° F. Anaerobic Gasket Maker is ideal for on-the-spot emergency repairs and resists many industrial and automotive chemicals. High Temperature Anaerobic Flange Sealant is particularly suited where maximum temperature and chemical resistance are required. This formulation permits clamping loads to be maintained for strong, leakproof assemblies. It seals all surface imperfections and eliminates costly retorquing operations. More flexible, Anaerobic Flange Sealant is designed for use on rigid, machined flanges that move in service.
Anaerobic Gasket Maker - http://www.devcon.com/prodfiles/pdfs/fam_tds_378.pdf
S.I.N.: 834-300 Permatex
Anaerobic Gasket Maker is a single component, medium strength, thixotropic, anaerobic sealant that cures rapidly. The product cures when confined in the absence of air between close fitting aluminum surfaces. It provides a tough, resilient, solvent and temperature resistant seal that flexes with flange movement caused by vibration, pressurization or thermal changes. NSF White Book registered.
PRODUCT BENEFITS
• No mixing
• No curing outside of joint• Non-corrosive to aluminum or cast iron parts
TYPICAL APPLICATIONS
Used for sealing flexible metal machined assemblies.
Typically used as a form-in-place gasket on rigid flanged
connections, e.g. Gearbox and engine castings.
### Gasketing - RTV ###
Permatex® the leader in form-in-place gasket makers, gasket dressings, and general-purpose sealants has and extensive selection of anaerobic gasket products designed to handle high temperature applications to 600°F. These products cure quickly and we offer multiple RTV technologies for your specific applications.
--- Ultra Black® Max. Oil Resistance RTV Silicone Gasket Maker ---
Fast-curing formula. Sensor-safe, low odor, noncorrosive. Fills gaps of up to 0.25" when fully cured. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistance properties through use of a patented adhesion system. Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent. Resists common fluids and excessive vibration.
--- Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker ---
Designed for high torque applications requiring a unique RTV gasket. Fills gaps of up to 0.25" when fully cured. Exceeds manufacturer’s performance requirements. Low odor, noncorrosive. Outstanding oil and coolant resistance. Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent. Resists common fluids and excessive vibration
--- Ultra Copper® Max. Temperature RTV Silicone Gasket Maker ---
Premium silicone that can withstand operating environments to 700°F (371°C) intermittent. Fills gaps to .25" when fully cured. Superior adhesion. Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets.
--- Ultra Blue® Multipurpose RTV Silicone Gasket Maker ---
Fills gaps up to 0.25" when fully cured. Sensor-safe, low odor, noncorrosive. Outstanding oil resistance and joint movement values. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent. Resists common fluids and excessive vibration.
--- Sensor-Safe Blue RTV Silicone Gasket ---
The original Permatex blue makes reliable "formed-in-place" gaskets that resist shrinking, cracking and migrating. Product cures to a strong, flexible rubber that seals flanges against leakage and resists oil and other shop fluids. Coat pre-cut gaskets to increase reliability. Temperature range -65°F to 500°F (-54°C to 260°C) intermittent. Low volatility. Fills gaps to .25" when fully cured.
--- High-Temp Red RTV Silicone Gasket ---
Formulated for hi-temp applications. Replaces almost any cut gasket by making reliable "formed-in-place" gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coat pre-cut gaskets to increase reliability. Temperature range -65ºF to 650ºF (-54°C to 343°C) intermittent. Resists auto and shop fluids. First generation gasket maker. Fills gaps to 0.25” when fully cured. MIL-A-46106 B
### Gasketing - Anaerobic ###
Permatex® the leader in form-in-place gasket makers, gasket dressings, and general-purpose sealants has an extensive selection of anaerobic gasket products designed to handle high temperature applications along with excellent chemical and solvent resistance.
--- Anaerobic Gasket Maker ---
Ideal for on-the-spot and emergency repairs, or when a conventional gasket is out of stock. This single component, thixotropic gasket maker cures rapidly for a medium strength, solvent resistant seal that resists temperatures up to 300°F (149°C) and fills gaps to 0.050" (primed). Can be used on a variety of metal surfaces including aluminum. Parts disassemble easily even after extended service.
continued.... http://www.devcon.com/prodfiles/pdfs/fam_tds_378.pdf
S.I.N.: 834-300 Permatex
Anaerobic Gasket Maker is a single component, medium strength, thixotropic, anaerobic sealant that cures rapidly. The product cures when confined in the absence of air between close fitting aluminum surfaces. It provides a tough, resilient, solvent and temperature resistant seal that flexes with flange movement caused by vibration, pressurization or thermal changes. NSF White Book registered.
PRODUCT BENEFITS
• No mixing
• No curing outside of joint
• Non-corrosive to aluminum or cast iron parts
TYPICAL APPLICATIONS
Used for sealing flexible metal machined assemblies. Typically used as a form-in-place gasket on rigid flanged
connections, e.g. Gearbox and engine castings.
--- Anaerobic Flange Sealant ---
Flexible gasketing material ideal for use on rigid, machined flanges. Withstands temperatures to 300°F (149°C). Fills gap of 0.050" (primed) and eliminates the need for preformed gaskets. Ideal for flanges that move in service.
Teroson - /TEROSON/Fluid-D.pdf
Henkel’s TEROSON provides a full range of adhesive, sealant and coating technologies
Teroson Fluid D
No comments:
Post a Comment