Bought some new parts. Swaylink bushes i think they were 2 or 4 bucks each. Trying to replicate what R's Racing Garage in Japan provide. Our bushes are unique in that the ID is 8mm and the OD is ??I can't remember. But anyways the typical universal bush of ID 8mm will have a small OD.
Had to get a new air compressor hose $55 from Enzed
And the bush with the correct OD will have a larger ID (10mm). Which is what i bought and plan to modify with a insert.
I always got the universal 12mm camber bolts. 65AUD a pair.
Had to get the flywheel machined, $45AUD
By CBA in Malaga.
CBA - Clutch & Brake Australia. Western Australia. 20 Oxleigh Dr. Malaga WA 6090
Pretty! Get the flywheel ground now lathe.
Need to use loctite on the flywheel bolts. Torque was 123NM.
I put all 5 in and then take one out at a time and add loctite.
Slowly increase torque on each bolt, do opposite bolts.
i put loctite on the last threads then use my finger to run it into the threads
No comments:
Post a Comment