Timing belt for Colt / Plus Z27A/Z27AG/Z27W/WG

---------------------Mitsubishi P#---------------------
PART NUMBER - DESCRIPTION - PRICE (EXC GST)

MI-MN119379 - BELT(VALVE TIMING) - $118.99
MI-MN119741 - PULLEY(TIMING BELT IDLER) - $107.41
MI-MR984714 - PULLEY(TIMING BELT TENSIONER) - $84.11
MI-MD372536 - OIL SEAL - $18.22
MI-MD377999 - OIL SEAL (CRANKSHAFT-FR) - $23.17
MI-MN155686 - WATER PUMP ASSY - $231.00
in AUD
--------------Rcolt Forum Background Info--------------
by Runuts

Timing belt sounds about right.
There are two belt pulleys, the Idler (MN119741), tensioner pulley(MR984714) and the hydraulic tensioner(MN119189). The two pulleys, you can check to see what condition they are in, the later, I would never risk. I would change that as a must. If it fails, you will more than likely skip teeth on the belt and have piston to valve contact.

Water pump's are always around that price from Mitsi. It will eventually fail, but its not necessary to change it unless there is an issue. Same with the oil seals, however, for the cost of the crank seal, I'd change it anyway. The other seal, is the seal from the oil pump to the block, its just an O-ring.

As for the gasket kit costing $570, thats just stupid. Considering how many gaskets this car has, from memory, head gasket, inlet man, exhaust and thats almost it, I cannot justify the cost. Don't know what else they include, but I wouldn't waste my money. Almost everything on these motors is sealed by liquid gasket maker(ie threebond etc). You could save yourself over $350 and just get the gaskets necessary when building the motor, ie headgasket, inlet, exhaust.

Either way, doing the job is very simple. The only part people may have issues with, is getting correct adjustment on the timing belt. The hydraulic tensioner, you either need the compression tool, or a press to depress it to insert the pin, before adjusting the tension.

Line up the timing marks, adjust the tensioner, make sure the pin(if you don't have one, use a suitable sized piece of wire or allen key) fits in and out of the hole when the belt is tensioned. Turn the engine over a couple of times to make sure. Then leave it for about 20-30 mins. If it still goes in perfectly, the tension is spot on.

---------------------Rcolt Forum P#---------------------

Gates Belt     MB 087 (MN158706 or MN119379) or TBMB087
Mitsubishi Tensioner MN11989
Bearings (NTN) TT658 + TT657 (You need both bearings)
Water Pump (GMB) GW M-82A

---------------------Rakuten Auctions---------------------
The set    Reference No.
Timing belt    TBMB087
Auto tensioner    MN119819
Tensioner    GT4030
Tensioner idler    GT4031
Water pump    GWM-82A


Car's name    Colt
Type    Z27A
Engine type    4G15
Model year    H14.10 ~ H22.08
The set    Reference No.
Timing belt    TBMB087
Auto tensioner    MN119819
Tensioner    GT4030
Tensioner idler    GT4031
Water pump    GWM-82A
     Oil service element


---------------------Yahoo Auctions---------------------
Timing belt (Kit) + W + other pump + tensioners etc. (new)
Timing belt for SET ☆ ☆ ▼ Colt / Plus Z27A/Z27AG/Z27W/WG
Product Code: STB622
☆ ☆ ☆ ☆ Product details are listed below please refer to product description of
various automobile parts supplies Jewels handling car!
Questions such as product inventory and compliance ◎, please contact us.
☆ Part guide you through the vehicle of your choice to fit ☆ 　　mail: Buhinkan@Titan.ocn.ne.jp　
please inform classified segment number / type designation number / chassis number of car registration ※.　　
Fits ◇: Colt / Colt Plus
Model ·: Z27A/Z27AG/Z27W/Z27WG
type □ E / G: Year 4G15 ○: H14.10 ~ - ~ - 02.10
including Ralliart ※
☆ oil each service element will be 1!
Contents ■ SET: TBMB087 + GWM-82A (manufactured by GMB) + TT657 + MN119819 + TT658 + V91110107(drive joy oil filter)
※ With auto-tensioner is
on the product features ◎, the car is fine fit product number is divided.
And compliance questions, please feel free to contact us
[Packaging segment number: 7]
Price: 32,183 yen (tax included)  deals and sales: ¥ 20,711 (tax included)
Sale Price: 19,109 yen (tax included)


-----------Conclusion
Timing belt for SET ☆ ☆ ▼ Colt / Plus Z27A/Z27AG/Z27W/WG
Fits ◇: Colt / Colt Plus
Model ·: Z27A/Z27AG/Z27W/Z27WG
type □ E / G: Year 4G15 ○: H14.10 ~ - ~ - 02.10
including Ralliart ※

- Timing belt                TBMB087(gates?)     or    MN119379(mitsu pn)
 - Auto tensioner/hydraulic tensioner    MN119819(mitsu pn)
     NOTE: most sources referred to it as MN119819 but i also found a MN119189, could be an error TBC
- PULLEY(TIMING BELT TENSIONER) / Tensioner    GT4030        or    MR984714(mitsu pn)
- PULLEY(TIMING BELT IDLER) / Tensioner idler    GT4031        or     MN119741(mitsu pn)
- Water pump    GWM-82A (manufactured by GMB) or MN155686(mitsu pn)

NTN Bearings - [tensioner, tensioner idler] - TT657, TT658

Other parts:

MI-MD372536 - OIL SEAL
MI-MD377999 - OIL SEAL (CRANKSHAFT-FR)