Monday, May 30, 2011

Autobahn88 Manifold Cracked

›
Thought i add info from my cracked mani... Some of the feedback i got: shit weld.... No edge prep at all, only one weld bead with minimal ...
2 comments:

MAF - PN MR985187

›
I put some info on the forums a while back.  Thought I consolidate all the info. killed my MAF...prob to much boost i dunno no... but goi...
Saturday, May 28, 2011

Track Day - No Limits 26th May

›
Went down to Barbs for the last time before winter hits. My goal was to hit 1:05 and lower. I knew it was possible. Last time on the track...
Tuesday, May 24, 2011

Teaching Myself Engines - Fact Finding Mission

›
Building my own engine.  I am going to attempt to build my own engine. Going to need to do alot of reading, sourcing parts and gettings mor...
Thursday, May 19, 2011

Clutch Options

›
So these guys DO make a clutch for us http://catalogue.xtremeclutch.com.au/catalogue.htm Part Number KMI22015DSBHD K = Kit MI - Mitsubish...
1 comment:
Wednesday, May 4, 2011

No Limits April - Results

›
Both my mate and I are running stock rubber. Mine were brand new. Think I was on a super lap till the car in front came off :( Aim for nex...

No Limits April

›
Couple photos of my mates Evo X on the track...Was our first time...But he owned me... I blame it on my new tires and running the car at ab...
Friday, April 22, 2011

Oil Catch Can

›
As you can see its not really a catch can @_@ I thought i try something different so I install an ebay oil/water air separator used in a com...

Rear Rotor Upgrade P2

›
Caliper and mount off. Use CRC between rotor and hub to weaken the seized joint. Then hit around the outer edge of the rotor with a rubber...
5 comments:

Rear Rotor Upgrade P1

›
Decided to stick some slotted rear rotors before my track day. I have front slotted one done about 30,000km ago. You need to remove the fl...
Wednesday, April 6, 2011

Oil Temp Sensor or Pressure Install for a Z27AG 4G15 - Similar to a 4G63/64 Block

›
For those looking at mounting any oil temp sensor and pressure sensor do note the Z27A has you covered. There are two point on the engine b...
1 comment:

RnD on Oil Cooler/ReLocation

›
Doing some research on making a oil relocation kit + oil cooler The colt can use various oil filters e.g. Ryco - z411, z142a, z436 all ha...
2 comments:

Dust Cover - Ball Joint Hub Boot Replacement

›
z27ag ball joint dust boot replacement! i think i was supplied with the wrong boot. i couldn't get the spring steal clip on @_@ so ei...

Axle Seal Replacement - 2960A032

›
had to put a new axle seal in, think we damaged it puttin the lsd in or me puttin the axle back (i think or just coincidence) do note my n...